Caltric Cylinder Head Valve Gasket Kit Compatible with

Z400 Valve Clearance. Caltric Cylinder Head Valve Gasket Kit Compatible with Excessive valve clearance results in valve noise and insufficient valve clearance results in valve damage and reduced power Valve Clearance Inspection Refer to the Valve Clearance Inspection in the Periodic Maintenance chapter

The major valve clearance inspection interval is a generous 24000 km (15000 miles) Anything outside of that needs adjusted with new tappet shims (if it's outside the specs, it'll probably be larger than listed, not tighter)

Checking Valve Lash/changing Shims Suzuki Z400 Forum Z400 Forums

Use pre-bent feeler gauges, because you can't get. Valve Clearance Adjustment Refer to the Valve Clearance Adjustment in the Periodic Maintenance chapter Valve Clearance Inspection Refer to the Valve Clearance Inspection in the Periodic Maintenance chapter

How to adjust valves in a Suzuki LTZ 400 or KFX400 YouTube. At any of those periods, change the oil and filter, and check the schedule to see what you need to adjust inspect, lubricate, or replace Check the intake and exhaust valve clearances at the distances indicated above and adjust the valve clearances to specification, if necessary.

Checking Valve Lash/changing Shims Suzuki Z400 Forum Z400 Forums. IN: 0.10~0.20mm (0.0039~0.0079 in) EX: 0.20~0.30mm (0.0079~0.0118 in) ENGINE TORQUE SPECIFICATIONS Engine oil drain plug crankcase 21nm 15.0ft-lb Engine oil drain plug oil tank 12nm 8.5ft-lb Engine oil level screw 5.5nm 4.0ft-lb Crankcase bolt outer 11nm 8.0ft-lb Neutral switch bolt 6.5nm 4.7ft-lb Oil. At every service, change the oil and do a general inspection